Speed Controller / Hand Valves / Ball Valves / Micro Couplers / Vacuum Generator / Regulator

Speed Controller

Elbow
Elbow
JSC4-M5
JSC4-01
JSC6-M5
JSC6-01
Straight
Straight
JSS4-M5
JSS4-01
JSS6-M5
JSS6-01
Union Straight
Union Straight
JSUC4-M5
JSU4-01
JSU6-M5
JSU6-01
Universal
Universal
JSM4-M5
JSM4-01
JSM6-M5
JSM6-01
Cat. No. Model Tube Dia. Thread size Control direction
(Ex.) JSC 4 M5 A
Specification :
Fluid admitted Air
Working pressure range 0 – 0.9 MPa (0 – 9 kgf/cm2)
Check valve operating pressure 0.05 MPa (0.5 kgf/cm2)
Working temperature range 0 – 60 °C
Control direction :
A : Meter-out control
The flow rate of air entering from the thread side can be controlled, whereas air entering from the joint side at the same (not controlled) flow rate.
B : Meter-in control
The flowrate of air entering from the thread side can be controlled, whereas air entering from the thread side comes out from the joint side at the same (not controlled) flow rate.

Hand Valves

  • ON-OFF pressure Hand Valves for control of pneumatic attachments.
  • These three-directional control valve when OFF discharge residual on the output side.
Straight A

HV6-01-*
Straight B
Straight B
HV01-6-*
Union Straight
Union Straight
HV4-4-*
HV6-6-*
Cat. No. Model Input size Output size Number of valve
(Ex.) HV 6 -01 -2

Ball Valves – Mini size with Quick Tubes Coupling

  • These Ball Valves can regulate the pressure from zero to full pressure by adjusting the lever according to the scale.
Union
Union
BVU4-4
BVU6-6
Straight
Straight
BVC01-4
BVC01-6
Cat. No. Type Thread size (R) Tube Dia. (-ФD)
(Ex.) BVU 01 -4
Cat. No. Type Port 1(-ФD) Port 2(-ФD)
(Ex.) HV 4 -4

Micro Couplers

  • These Micro Couplers incorporate a quick-fitting joint for pneumatic tubes.
  • The socket comes wiht a mechanism that stops air flow simultaneously with the removal of the plug.
Quick-fitting type
Socket
Socket
CPSE3-4
CPSE7-6
Plug
Plug
CPPE3-4
CPPE7-6
Straight Thread type
Socket
Socket
CPSE3M-4
CPSE7M-6
Plug

CPPE3-M5
CPPE7-M5
Cat. No. Model Socket Plug Connection Size Bulkhead type Tube Dia. Thread Size
(Ex.) CPS E3 M -4

Vacuum Generator Quick Fitting Type Ejector

  • The Vacuum Generator, creating vacuum by use of compressed air, can be used in combination with a sucion cup to convey materials.
  • Easy to mount as the quick-fitting joints are incorporated.
Box type Union
With Vacuum switch

VBH10-66S
Plug
Plug
VBH10-66H
Pipe type
Pipe type straight
Pipe type straight
VUH07-M56A
VUH07-016A
Pipe type union straight
Pipe type union straight
VUH07-66A
Cat. No. Model Performance *1 Nozzle size *2 Vacuum port size Air supply port size Additinal feature *3
(Ex.) VU H 07 6 6 A
Performance *1
H : High-vacuum type
L : Large-flow type
E : Economy type
Nozzle size *2
Code Size (mm) H type L type E type
07 0.7 – 92 ~93kPa
12.5 ~ 13 litre/min
– 66 kPa
22 ~ 26 litre/min
– 90 ~ 92 kPa
10 ~ 10.5 litre/min
10 1.0 – 93 kPa
28 litre/min
– 66 kPa
42 litre/min
– 92 kPa
21 litre/min
Additinal feature *3
J : Concentrated exhaust type
A : Disassembly type

Regulator with Tubes Coupling

  • The compact design with a built-in quick-fitting joint makes flexible layout possible.
  • The regulator comes with a relief mechanism taht facilitates adjustment of devices.
  • The compact regulator with a pressure gauge is best suited for use with a manifold type solenoid valve.
With Vacuum switch
レギュレーター / エルボ
RVC4-M5
RVC4-01
RVC6-M5
RVC6-01
Gauge union
レギュレーター / ケージ付ユニオン
RVUM4-4
RVUM6-4
RVUM6-6
Cat. No. Model Tube Dia. (ФD) Thread size (-R)
(Ex.) RVC- 4 -M5
Cat. No. Model Port 1 (-ФD1) Port 2 (-ФD2)
(Ex.) RVUM 4 -4