DY SERIES

DY-3000 is a newly developed the Pulsed TIG welding machine to weld the Aluminum Alloy and general mold materials.

DY-3000
DY-3000

The Principle of Welding

In the atmosphere of the Inert gas such as Argon gas, the arc between the Tungsten electrode and the base material (work piece) is produced and the base material (work piece) and the welding material fuse due to the heat by the arc.

The base material and the welding material melt for an instant. The arc irradiation is intermittently Made and the weld bead is built up. Therefore the heat affection against the base material is reduced.

Example : Aluminum alloy

Features

* DY-3000 makes possible to make the precision padding and large size of cladding.
* Aluminum Alloy can be welded by DY-3000.
* Arc radiation time can set up / control every 0.01 seconds.
* Arc radiation time can set up between 1 – 999 msec.
* The heat affection is reduced by half in comparison with the general-purpose TIG welder.
* Sink and distortion in the base material are decreased.
* Reliable fusion welding.
* Simple operation.

Application

* Prevention of burr for the parting line.
* Repair of the Edge and 3-point corners.
* Repair of galling portion.
* Repair of the Secondary sink in the general welding.
* Filling in the pinhole.
* Precision repair for the part which TIG welder cannot make.
* Applicable molds : Plastic, Rubber, Blow, Die cast, Press and Glass mold etc.,

Specification

Input Voltage : AC200V – AC240V, Single phase
Consumable Power : 10 KVA
Output Power : 8 KW
Control System : Invertor system
Function : Precision circuit / Auto Timer
Timer Interval : 0.1 – 5.0 seconds
Arc Timer Set : 1 – 999 msec
Power Adjustment : 0 – 100%
Duty Cycle : 60 %
Gas Type : Argon gas
Weight : 30 kgs
Dimension : W300 x D540 x H470 mm

Example

Example : Aluminum alloy
Example : Aluminum alloy Example : Aluminum alloy Example : Aluminum alloy Example : Aluminum alloy

Example : Steel
Example : Steel Example : Steel


DY-6000 is a newly developed the Pulsed TIG welding machine  to weld the Beryllium Copper Alloy, Aluminum Alloy andgeneral mold materials.  .

DY-6000
DY-3000

Features

* DY-6000 makes possible to make the precision padding and large size of cladding.
* Beryllium Copper Alloy, Aluminum Alloy and general mold materials can be welded by DY-6000.
* Arc radiation time can set up / control every 0.01 seconds.
* Arc radiation time can set up between 1 – 999 msec.
* The heat affection is reduced by half in comparison with the general-purpose TIG welder.
* Sink and distortion in the base material are decreased.
* Reliable fusion welding.
* Simple operation.

Application

* Prevention of burr for the parting line.
* Repair of the Edge and 3-point corners.
* Repair of galling portion.
* Repair of the Secondary sink in the general welding.
* Filling in the pinhole.
* Precision repair for the part which TIG welder cannot make.
* Applicable molds : Plastic, Rubber, Blow, Die cast, Press and Glass mold etc.,

Specification

Input Voltage : AC200V – AC240V, Three phases
Consumable Power : 12 KVA
Output Power : 10 KW
Control System : Invertor system
Function : Precision circuit / Auto Timer
Timer Interval : 0.1 – 5.0 seconds
Arc Timer Set : 1 – 999 msec
Power Adjustment : 0 – 100%
Duty Cycle : 60 %
Gas Type : Argon gas
Weight : 35 kgs
Dimension : W305 x D540 x H505 mm

Example

Example : Beryllium Copper Alloy
Example : Beryllium Copper Alloy Example : Beryllium Copper Alloy Example : Beryllium Copper Alloy

Standard Accessories

accessories accessories accessories

Power cord

Mini Torch

Earth Cord with Copper plate

Foot Switch

Protective Gloves

Electrode 3 pcs. (2 mm dia. x 75 mmL)

Argon Gas Regulator Hose Set