Micro Angle Grinder

MICRO ANGLE GRINDER / MAG-121N MICRO ANGLE GRINDER / MAG-122N MICRO ANGLE GRINDER / MAG-093N

MAG-121N

MICRO ANGLE GRINDER
Code No. 108

(120° ANGLE TYPE)
FOR PRECISION GRINDING AND POLISHING

52,500rpm
Max.size(*1) : 148 x Φ17
Air pressure supply : 0.6MP
The amount of air consumption (per min.) : 120NL
Weight : 140g

Set of package
  1. MAG-121N
  2. Air hose1.5m
  3. Hose band 2 pcs
  4. Quick joint
  5. Over hose
  6. Set pin
  7. Wrench
  8. Φ13 Mounted point NSL 2pcs.
  9. Lap shaft
  10. Φ25 disk type NSL7pcs.
  11. Mounted point110 Rubber disc holder
  12. Φ10Pol-Per system9pcs.

MAG-122N

MICRO ANGLE GRINDER
Code No. 107

(120° ANGLE TYPE)
FOR SURFACE GRINDING AND POLISHING

35,000rpm
Max.size(*1) : 141 x Φ17
Air pressure supply : 0.6MP
The amount of air consumption (per min.) : 120NL
Weight : 140g

Set of package
  1. MAG-122N
  2. Air hose1.5m
  3. Hose band 2 pcs
  4. Quick joint
  5. Over hose
  6. Set pin
  7. Φ20 cups grinding wheel 1 pcs.
  8. Φ20Rubber disc holder
  9. Φ20NSL7pcs.
  10. Φ20Pol-Per system9pcs.

MAG-093N

MICRO ANGLE GRINDER
Code No. 105

(90° ANGLE TYPE)
FOR SURFACE GRINDING AND POLISHING

23,500rpm
Max.size(*1) : 138 x Φ33
Air pressure supply : 0.6MP
The amount of air consumption (per min.) : 120NL
Weight : 160g

Set of package
  1. MAG-093N
  2. Air hose1.5m
  3. Hose band 2 pcs
  4. Quick joint
  5. Over hose
  6. Set pin
  7. Φ30 cups grinding wheel 1 pcs.
  8. Φ30Rubber disc holder
  9. Φ30NSL7pcs.
  10. Φ30Pol-Per system18pcs.
MICRO ANGLE GRINDER / MAG-123N    

MAG-123N

MICRO ANGLE GRINDER
Code No. 106

(120° ANGLE TYPE)
FOR SURFACE GRINDING AND POLISHING

23,500rpm
Max.size(*1) : 142 x Φ32
Air pressure supply : 0.6MP
The amount of air consumption (per min.) : 120NL
Weight : 175g

Set of package
  1. MAG-123N
  2. Air hose1.5m
  3. Hose band 2 pcs
  4. Quick joint
  5. Over hose
  6. Set pin
  7. Φ30 cups grinding wheel 1 pcs.
  8. Φ30Rubber disc holder
  9. Φ30NSL7pcs.
  10. Φ30Pol-Per system18pcs.
   

*1 : Not including tip tools

Characteristics

  • 120 and 90 degrees angles are prepared based on the human engineering.
  • The unpleasant noise is reduced, which tends to come out by the angle type.
  • Abundant tip tools correpond to various uses.