Flat Type

Small-diameter Type (Unit:mm)

Small-diameter Type External diagram

Small-diameter Type

External diagram

Outside diameter(D) Thickness(T) Hole diameter(H) Outside diameter(D) Thickness(T) Hole diameter(H)
10 x 3 x 2 30 x 5 x 3
15 x 3x 2 40 x 4 x 3
20 x 1.5 x 1.8 40 x 20 x 6
20 x 2 x 2 50 x 5 x 6
20 x 3 x 2 50 x 10 x 6
20 x 4 x 2 50 x 20 x 9.53
20 x 5 x 3 50 x 20 x 12.7
21 x 3 x 2 60 x 10 x 6
25 x 2 x 1.8 75 x 3 x 6
25 x 3 x 1.8 75 x 3 x 6
25 x 3 x 2 75 x 25 x 9.53
25 x 5 x 3 90 x 4 x 9.53
30 x 3 x 3 90 x 8 x 9.53
Application Polishing of shallow grooves, spots and rings.

Large-diameter Type (Unit:mm)

Large-diameter Type External diagram

Large-diameter Type

External diagram

Outside diameter(D) Thickness(T) Hole diameter(H) Outside diameter(D) Thickness(T) Hole diameter(H)
100 x 4 x 9.53 205 x 10 x 25.4
100 x 15 x 12.7 205 x 20 x 25.4
125 x 16 x 12.7 255 x 6 x 25.4
150 x 13 x 15.9 255 x 20 x 25.4
150 x 20 x 15.9 305 x 13 x 25.4
205 x 6 x 19.1 355 x 50 x 50.8

* We can manufacture products of other shapes and dimensions.

Applications Suitable for automated machines, dedicated machines, surfaces forged, and removal of weld beads.
Standard hole diameters (Unit : mm)
1.8, 2, 3, 6, 12.7, 15.9, 19.1, 22.2, 25.4, 31.8, 50.8, 72 and 120
Caution If the equipment operates at the rotating speed, install an inverter to reduce revolutions when using these products.
Be careful not to over-tighten the flange and other sections because the abrasive stones have a degree of elasticity.
* The specifies revolution speed limit varies depending on the material.